|
|
|
Installation Instructions for Rubber Fuel Hose:  NOTE: When cutting lines be sure to leave a proper length of line to reach re-connection points at hose ends a: Cut rubber fuel hose, allowing enough room to install b: Slip rubber fuel hose over barbed fuel lifting at both ends, c: Secure with clamps, then check for leaks. Installation Instructions for Solid Fuel Line:  Mounting brackets supplied with all catalyst sizes a: Cut metal fuel line as close to carburetor or fuel injections entry as possible b: Using high-pressure push-loc fuel hose, attach to push-loc fitting then slip over steel line and tighten clamps. c: Check for leaks. Installation Instructions for Teflon or Plastic Fuel Lines:  Mounting brackets supplied with all catalyst sizes a: Cut plastic fuel line b: Carefully push plastic fuel line over barbed fitting. A heat gun might help soften up the plastic line. c: Check for leaks.  At The Frame Rail(Before Install) 
|
|
|
|